24/7 EMERGENCY
Burst pipe? Boiler down? No hot water? Engineers on call right now —
Mon–Fri 8am–6pm · Sat 9am–5pm ·
Emergency line open 24/7
Gas Safe Registered
Trustpilot 4.9★
24/7 EMERGENCY
Burst pipe? Boiler down? No hot water? Engineers on call right now —
Emergency line open 24/7
Gas Safe Registered
Trustpilot 4.9★
We install outside taps across Westminster — from stucco-fronted townhouses in Belgravia and Mayfair to garden-square conversions in Pimlico and mansion flats near Marylebone — connecting to your existing internal plumbing and fitting a fully operational outdoor tap with isolation valve, typically in under two hours. Fixed price, clean installation, 12-month guarantee.
SW1
W1
W2
Call 020 1234 5678 for immediate assistance. We respond within 24 hours online.
Westminster spans some of London’s highest-value residential streets — from grand stucco terraces to compact mews houses and mansion block conversions. Our engineers are experienced with the access and conservation considerations each property type brings.
Many Belgravia and Mayfair properties sit within conservation areas, with front lightwells, communal garden squares and listed façades. We route pipework discreetly and confirm wall positions that respect the property's original character before any drilling takes place.
Marylebone's Georgian terraces often have long internal pipe runs from kitchen to rear courtyard or lightwell. We assess the most practical connection point to keep the internal run neat and the fixed price accurate.
Pimlico's garden squares and lower-ground-floor flats are popular spots for a rear or side-return outside tap — ideal for window boxes, planters and small courtyard gardens common to this part of Westminster.
Newer residential blocks around Victoria and St James's are typically served by compact combi systems with limited external wall access. We identify the best isolation point and liaise with building management where consent for external works is required.
A complete outside tap installation — from the connection inside to a fully operational outdoor tap — carried out in a single visit at a fixed price.
Your plumber identifies the nearest suitable cold water pipe — typically the kitchen, utility area, or under the stairs — and assesses wall thickness, external mounting position and pipe run to give an accurate fixed price.
We fit a tee junction into the cold water supply and run a dedicated line to the external wall, clipped neatly and following the most discreet practical route — important in period Westminster properties with original skirting and cornicing.
We drill a single hole through the external wall at the agreed position, feed the supply pipe through, and mount the tap securely with appropriate external fixings, sealed with silicone around the wall penetration.
An isolation valve is fitted internally so the supply can be shut off completely over winter. We then test the tap and check every connection, inside and out, before signing the job off.
Here are the outside tap requests we see most often across Enfield’s mix of period terraces, 1930s semis, and flat conversions.
Durable brass or stainless outside tap designed for continuous outdoor use, sized to accept standard hose connectors. Tap style can be specified at booking.
Fitted to the inside supply line before it passes through the external wall, so the tap can be isolated completely over winter to prevent freezing.
Wall penetration sealed with exterior-grade silicone around the backplate and through the brickwork or render — including stucco finishes common across Belgravia and Mayfair.
Clipped at regular intervals along the most discreet available route, avoiding exposed pipe across prominent period features where a neater route is practical.
We run a full test cycle, checking every connection point, before confirming the installation is leak-free and the tap operates correctly.
Any connection we've made that develops a leak, or a fitting failure due to our installation, is resolved at no charge within 12 months — issued in writing on the day.
Cost depends on the distance from the nearest suitable cold water pipe, wall thickness and material, and any additional pipe concealment required. All prices confirmed before we attend — no call-out charge, and no Westminster surcharge.
Single tap, standard wall, short pipe run
Connection point further from external wall — common in Georgian terraces
Front and rear, or two garden points fitted together
Like-for-like tap and valve replacement
Here are the outside tap requests we see most often across Enfield’s mix of period terraces, 1930s semis, and flat conversions.
From Belgravia's listed stucco terraces to Mayfair mews houses and Marylebone conversions, our engineers are used to working carefully in properties where original features and finishes matter.
Internal pipe runs are routed to avoid disturbing period skirting, cornicing and flooring wherever a neater route is available — and every wall penetration is properly sealed.
Many Westminster addresses are mansion blocks or managed developments. We're used to coordinating access and any required consent with concierges or managing agents.
The same fixed pricing applies whether you're in SW1 Belgravia or W1 Marylebone. No zone uplift, no call-out charge, no surprise invoice.
Every installation includes an internal isolation valve as standard, protecting your supply pipe from freezing over winter — essential guidance we talk through on every job.
All outside tap installation work in Westminster carries our 12-month workmanship guarantee, issued in writing before we leave your property.
Read all reviews on Trustpilot →
“Our house in Belgravia is in a conservation area, so we were nervous about anything involving drilling into the front elevation. The engineer talked us through exactly where the tap could go without touching the stucco detailing. Neat job, no fuss.”
“Mews house in Marylebone with a tiny courtyard — I didn’t think there’d be a practical route for a tap. Plumber found a short, sensible run from the utility cupboard and it was done in under two hours. Really pleased with the finish.”
“Flat in a managed block near Victoria — the team liaised directly with our building manager to get access arranged, which saved me a lot of back and forth. Tap works perfectly, isolation valve fitted as promised.”
Yes. We cover the whole of the Westminster borough — Mayfair, Belgravia, Pimlico, Marylebone, Victoria, St James's and Soho — across postcodes SW1, W1, W2 and NW1. Our engineers are based locally across central and south-west London for a fast response.
In most cases, yes. Installing an outside tap does not usually require planning permission, even in a conservation area, as it's a permitted minor plumbing installation. Where a property is listed, some restrictions on external alterations may apply — your engineer will advise at the assessment and choose a position that avoids sensitive features such as stucco detailing or original brickwork.
If you're in a leasehold flat or a managed mansion block, your lease will usually require freeholder or managing agent consent before altering the external fabric of the building. We're happy to liaise directly with building management to confirm access and consent before the installation date.
A standard single outside tap installation starts from £180, including the tap, isolation valve, wall drilling, pipe connection and full leak test. Two taps on the same visit start from £320. Replacing an existing outdoor tap starts from £95. Pricing is identical across all Westminster postcodes — there's no central London surcharge.
Yes. Many Westminster properties have compact rear courtyards, lightwells or basement-level gardens rather than large plots. These are well suited to a single outside tap, and the shorter pipe runs typical of these spaces often keep the job on the standard fixed price.
Yes. The section of pipe between the isolation valve and the tap body can freeze in cold weather if left live. Close the internal isolation valve at the start of winter, open the outside tap briefly to drain the external section, then reopen the valve in spring. We explain this on every installation.
Fixed price confirmed before we attend. Tap, isolation valve and 12-month guarantee all included. Available across all of Westminster.
We also cover these neighbouring boroughs — same fixed prices, same-day availability.